Steel Metal Buildings

Home | Components/Accessories

Components/Accessories

Panels

PBR (roof and walls)

The PBR panel is commonly used for a wide variety of architectural, agricultural, commercial, and industrial applications. PBR is a structural panel and an exposed fastener panel that can be used for both roof and wall applications. The minimum roof slope for PBR is 1/2:12.

Features and benefits:

  • UL 790, Class A for external fire and roof assembly for UL 263 for internal fire.

Product Specifications:

Applications: Roof and wall

Coverage Widths: 36″

Rib Spacing: 12″ on center

Rib Height: 1 1/4″

Minimum Slope: 1/2:12

Panel Attachment: Exposed Fastening System

Gauges: 26 (standard); 29,24 (optional)

Finishes: Smooth

Coatings: Galvalume, Steel Metal 200, Steel Metal 300

R Panel (roof and walls)

The R panel is an exposed fastener system that can be used for both roof and wall applications. The R panel can be installed directly over the purlins or joists. R panels are recommended for 1:12 or greater roof slopes.

Features and benefits:

  • Numerous UL 580 ratings are available, as well as UL 790, Class A for external fire and roof assembly for UL 263 for internal fire and the UL 2218 Class 4 impact rating.
  • R panels carry Florida approval

Product Specifications:

Applications: Roof and wall

Coverage Widths: 32″ wall, 29.33″ roof

Rib Spacing: 6″ on center

Rib Height: 3/4″

Minimum Slope: Minimum 1:12

Panel Attachment: Exposed Fastening System

Gauges: 26 (standard); 29,24 (optional)

Finishes: Smooth

Coatings: Galvalume, Steel Metal 200, Steel Metal 300

Standing Seam Roof

The Ultra-Dek® roof panel is a snap-together, trapezoidal leg standing seam roof system. Ultra-Dek® panels are available in 12-inch,
18-inch and 24-inch widths. Ultra-Dek® requires a minimum slope of 1⁄4:12 and is ideal for industrial, commercial and architectural
applications. Ultra-Dek® can be erected on various types of construction.

Features and benefits:

  • Begins and ends in the high, reducing the risk of leakage at the rake
    that can occur when finishing in the low.
  • Low and high clips are available to allow for various thicknesses
    of insulation to be installed between the panels and purlins.
  • Numerous UL 580 Construction rating are available, as well as UL 790,
    Class A for external fire, numerous roof assemblies for UL 263 for
    internal fire and the UL 2218 Class 4 impact rating.
  • Ultra-Dek® carries Florida approval rating.

Product Specifications:

Applications: Roof

Coverage Widths: 18″, 24″

Minimum Slope: 1/4:12

Panel Attachment: Concealed Fastening System; Low, High, Fix and Sliding

Gauges: 24 (standard); 26 (optional)

Finishes: Smooth

Coatings: Galvalume, Titan 200, Titan 300

Standing Seam Roof

The Double-Lok® roof panel is a mechanically field-seamed, trapezoidal leg standing seam roof system. Double-Lok® panels are
available in 18-inch and 24-inch widths. Double-Lok® requires a minimum slope of 1 ⁄4:12. Double-Lok® panels are ideal for industrial,
commercial and architectural applications.

Features and benefits:

  • Designed to cope with the forces of expansion and contraction. This is
    accomplished by allowing the panels to freely move up and down the
    roof slope.
  • 2″ and 4″ sliding clips are available in high and low versions, which
    allow thermal movement on a wide variety of building widths.
  • Numerous UL 580 Construction rating are available, as well as UL 790,
    Class A for external fire, numerous roof assemblies for UL 263 for
    internal fire and the UL 2218 Class 4 impact rating.
  • Double-Lok® carries FM, Florida approval and Dade County ratings.

Product Specifications:

Applications: Roof and wall

Coverage Widths: 18″ and 24″

Minimum Slope: 1/4:12

Panel Attachment: Concealed Fastening System; Low, High, and 2″ Stand Off Sliding Clips

Gauges: 24

Finishes: Smooth

Coatings: Galvalume, Titan 200, Titan 300

Quick Quote

Approximately how large a building do you need?
(Answer with numbers only, -- e.g., 4, not four, using only number and no commas.)
Who do we have the pleasure of speaking with?

Our Customers Say

Have Any Questions? Call Us Now!

We are excited to work with you to create your ideal steel structure. Give us a call and we can provide you with a quick quote. We look forward to speaking with you!